text.skipToContent
text.skipToNavigation
![182500]()
DIAMAX Edge Rounding Cutters CM DP - HOLZ-HER FF701 (FF501 / 1833)
ID
187035
Product variants
Product variants
| DMP1 | R1 | DA | LMP1 | IMD | IMS | Lmax | Z | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 182500 | |||||||||
| 182501 | |||||||||
| 61 | 2 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 182502 |
| 61 | 2 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | LH | 182503 |
| 61 | 2.5 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 182504 |
| 61 | 2.5 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | LH | 182505 |
| 61 | 3 | 72.5 | 13.5 | 20 | 5x2,2 | 19 | 4 | RH | 182506 |
| 61 | 3 | 72.5 | 13.5 | 20 | 5x2,2 | 19 | 4 | LH | 182507 |
| 61 | 1.3 | 69 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 187034 |
| 61 | 1.3 | 72.5 | 20 | 5X2,2 | 19 | 4 | LH | 187035 |
| DMP1 | R1 | DA | LMP1 | IMD | IMS | Lmax | Z | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 182500 | |||||||||
| 182501 | |||||||||
| 61 | 2 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 182502 |
| 61 | 2 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | LH | 182503 |
| 61 | 2.5 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 182504 |
| 61 | 2.5 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | LH | 182505 |
| 61 | 3 | 72.5 | 13.5 | 20 | 5x2,2 | 19 | 4 | RH | 182506 |
| 61 | 3 | 72.5 | 13.5 | 20 | 5x2,2 | 19 | 4 | LH | 182507 |
| 61 | 1.3 | 69 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 187034 |
| 61 | 1.3 | 72.5 | 20 | 5X2,2 | 19 | 4 | LH | 187035 |
Product Details
Maschine
edge banding machines HOLZ-HER aggregate FF701 (FF501 / 1833)
Application
for rounding of solid wood, veneer and plastic edge bands
Design
with shear angle
polished face and high-finish clearance angle
resharpenable area 3.5 mm
n max = 24.000 min-1
Advantages
optimized chip removal thanks to ChipMeister version
less chips remain inside of the machine
no malfunctions due to chips
reduced suction performance
low noise level
Notes
constant basic dimensions a and D1
sense of rotation according to VDMA 8849
Radius 1
1.3
Diameter - Outermost cutting point
72.5
Diameter max
72.5
Interface towards the machine
Bore-DKW
Bore / shank diameter
20
Number of teeth
4
RPM max
018000
Cutting direction
left-handed
Cutting material group
Diamond, polycrystalline
Type of feed
MEC - mechanical feed
Machine group
Through-feed machines
Machine type
HOLZHER
Machine / Aggregate
HOLZ-HER FF501 (1833)
Scope of application
through-feed processing
Application
Edge trimming refinishing
Processing step
Profile cutting
Workpiece material
Solidwoodandsolidwoodproducts
Plastics
Wood-based panels
Plastics
Wood-based panels
Workpiece type
Particle boards
MDF
Laminated particle board
Thermoplastics
Soft wood
HDF
Solid wood and veneered mat
Glued laminated timber
Hard wood
MDF
Laminated particle board
Thermoplastics
Soft wood
HDF
Solid wood and veneered mat
Glued laminated timber
Hard wood
Workpiece material
Particle board-melamcoverlay
PP (polypropylene)
PVC (foil)
MDF (lacquered)
Acrylic glass (PMMA)
Spanplatte (HPL beschichtet)
MDF (raw)
Longitudinal cut dry
KVH
PE (block material)
HDF (panel material)
BSH
Veneered timber
ABS (block material)
PVC (block material)
Particleboard-highglossfoiled
Particle board (veneered)
Particle board (CPL-coated)
Particle board (raw)
Longitudinal cut dry hardwood
Multiplex
Wood core plywood
Plywood
Glued laminated timber board
PP (polypropylene)
PVC (foil)
MDF (lacquered)
Acrylic glass (PMMA)
Spanplatte (HPL beschichtet)
MDF (raw)
Longitudinal cut dry
KVH
PE (block material)
HDF (panel material)
BSH
Veneered timber
ABS (block material)
PVC (block material)
Particleboard-highglossfoiled
Particle board (veneered)
Particle board (CPL-coated)
Particle board (raw)
Longitudinal cut dry hardwood
Multiplex
Wood core plywood
Plywood
Glued laminated timber board