text.skipToContent
text.skipToNavigation
![]()
DIAMAX Edge Rounding Cutters CM DP - HOLZ-HER FF701 (FF501 / 1833)
ID
182501
Product variants
Product variants
| DMP1 | R1 | DA | LMP1 | IMD | IMS | Lmax | Z | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 182500 | |||||||||
| 182501 | |||||||||
| 61 | 2 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 182502 |
| 61 | 2 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | LH | 182503 |
| 61 | 2.5 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 182504 |
| 61 | 2.5 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | LH | 182505 |
| 61 | 3 | 72.5 | 13.5 | 20 | 5x2,2 | 19 | 4 | RH | 182506 |
| 61 | 3 | 72.5 | 13.5 | 20 | 5x2,2 | 19 | 4 | LH | 182507 |
| 61 | 1.3 | 69 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 187034 |
| 61 | 1.3 | 72.5 | 20 | 5X2,2 | 19 | 4 | LH | 187035 |
| DMP1 | R1 | DA | LMP1 | IMD | IMS | Lmax | Z | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 182500 | |||||||||
| 182501 | |||||||||
| 61 | 2 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 182502 |
| 61 | 2 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | LH | 182503 |
| 61 | 2.5 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 182504 |
| 61 | 2.5 | 72.5 | 13.5 | 20 | 5X2,2 | 19 | 4 | LH | 182505 |
| 61 | 3 | 72.5 | 13.5 | 20 | 5x2,2 | 19 | 4 | RH | 182506 |
| 61 | 3 | 72.5 | 13.5 | 20 | 5x2,2 | 19 | 4 | LH | 182507 |
| 61 | 1.3 | 69 | 13.5 | 20 | 5X2,2 | 19 | 4 | RH | 187034 |
| 61 | 1.3 | 72.5 | 20 | 5X2,2 | 19 | 4 | LH | 187035 |
Product Details
Maschine
edge banding machines HOLZ-HER aggregate FF701 (FF501 / 1833)
Application
for rounding of solid wood, veneer and plastic edge bands
Design
with shear angle
polished face and high-finish clearance angle
resharpenable area 3.5 mm
n max = 24.000 min-1
Advantages
optimized chip removal thanks to ChipMeister version
less chips remain inside of the machine
no malfunctions due to chips
reduced suction performance
low noise level
Notes
constant basic dimensions a and D1
sense of rotation according to VDMA 8849
Machine group
Through-feed machines
Machine type
HOLZHER
Machine / Aggregate
HOLZ-HER FF501 (1833)
Scope of application
through-feed processing
Application
Edge trimming refinishing
Processing step
Profile cutting
Workpiece material
Plastics
Solidwoodandsolidwoodproducts
Wood-based panels
Solidwoodandsolidwoodproducts
Wood-based panels
Workpiece type
HDF
Thermoplastics
Soft wood
Hard wood
Glued laminated timber
MDF
Solid wood and veneered mat
Particle boards
Laminated particle board
Thermoplastics
Soft wood
Hard wood
Glued laminated timber
MDF
Solid wood and veneered mat
Particle boards
Laminated particle board
Workpiece material
Particle board-melamcoverlay
PP (polypropylene)
Longitudinal cut dry
Acrylic glass (PMMA)
KVH
Veneered timber
PVC (block material)
MDF (lacquered)
HDF (panel material)
Spanplatte (HPL beschichtet)
PVC (foil)
PE (block material)
MDF (raw)
Glued laminated timber board
BSH
ABS (block material)
Particleboard-highglossfoiled
Longitudinal cut dry hardwood
Plywood
Multiplex
Wood core plywood
Particle board (raw)
Particle board (CPL-coated)
Particle board (veneered)
PP (polypropylene)
Longitudinal cut dry
Acrylic glass (PMMA)
KVH
Veneered timber
PVC (block material)
MDF (lacquered)
HDF (panel material)
Spanplatte (HPL beschichtet)
PVC (foil)
PE (block material)
MDF (raw)
Glued laminated timber board
BSH
ABS (block material)
Particleboard-highglossfoiled
Longitudinal cut dry hardwood
Plywood
Multiplex
Wood core plywood
Particle board (raw)
Particle board (CPL-coated)
Particle board (veneered)