text.skipToContent
text.skipToNavigation
![192464]()
KKO
ID
192475
Product variants
Product variants
| DA | SB1 | IML | IMD | Z | ZK | NL | AShear | W_Span | CornerAngle | Cut_Mat | Material number |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 160 | 3.5 | 2.5 | 22 | 36 | WS | 5 | -5 | 15 | HW | 188662 | |
| 160 | 3 | 2.5 | 22 | 36 | WS | 0 | -5 | 15 | HW | 192456 | |
| 90 | 3 | 2 | 30 | 20 | WS | 0 | 8 | 10 | HW | 192471 | |
| 100 | 2.4 | 1.6 | 22 | 12 | WS | 5 | 15 | 10 | HW | 192472 | |
| 100 | 3.2 | 2.2 | 22 | 20 | WS | 0 | 8 | 15 | HW | 192475 | |
| 100 | 2.6 | 1.6 | 32 | 30 | WS | 5 | 10 | 15 | HW | 192476 | |
| 110 | 3.6 | 2.5 | 22 | 20 | WS | 5 | 8 | 30 | HW | 192477 | |
| 110 | 3.6 | 2.5 | 32 | 20 | WS | 5 | 8 | 30 | HW | 192478 | |
| 120 | 3.2 | 2.2 | 32 | 20 | WS | 5 | 10 | 10 | HW | 192483 | |
| 140 | 3.2 | 2.2 | 22 | 36 | WS | 5 | 10 | 15 | HW | 192488 | |
| 140 | 3.2 | 2.2 | 16 | 36 | WS | 5 | 10 | 15 | HW | 192489 | |
| 150 | 3.2 | 2.2 | 22 | 48 | WS | 5 | 10 | 10 | HW | 192493 | |
| 160 | 3.2 | 2.2 | 30 | 24 | WS | 2/7/42 | 5 | 15 | 10 | HW | 192495 |
| 160 | 3.2 | 2.2 | 40 | 30 | WS | 4/5,5/52 | 10 | -8 | 20 | HW | 192496 |
| 160 | 3.2 | 2.2 | 20 | 48 | WS | 2/5/32 | 5 | 10 | 10 | HW | 192497 |
| 160 | 3.2 | 2.2 | 22 | 48 | WS | 5 | -8 | 10 | HW | 192498 | |
| 200 | 3.2 | 2.2 | 30 | 64 | WS | 4/6,6/60 + 2/6,2/42 | 0 | 10 | 15 | HW | 192501 |
| 125 | 2.4 | 1.6 | 32 | 24 | WS | 0 | 15 | 30 | HW | 192900 | |
| 170 | 3.2 | 2.2 | 30 | 36 | WS | 4/5.5/52 | 0 | 10 | 20 | HW | 193354 |
| 100 | 2.4 | 1.6 | 22 | 20 | WS | 2/4/30 | 5 | -8 | 10 | HW | 58808802 |
| DA | SB1 | IML | IMD | Z | ZK | NL | AShear | W_Span | CornerAngle | Cut_Mat | Material number |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 160 | 3.5 | 2.5 | 22 | 36 | WS | 5 | -5 | 15 | HW | 188662 | |
| 160 | 3 | 2.5 | 22 | 36 | WS | 0 | -5 | 15 | HW | 192456 | |
| 90 | 3 | 2 | 30 | 20 | WS | 0 | 8 | 10 | HW | 192471 | |
| 100 | 2.4 | 1.6 | 22 | 12 | WS | 5 | 15 | 10 | HW | 192472 | |
| 100 | 3.2 | 2.2 | 22 | 20 | WS | 0 | 8 | 15 | HW | 192475 | |
| 100 | 2.6 | 1.6 | 32 | 30 | WS | 5 | 10 | 15 | HW | 192476 | |
| 110 | 3.6 | 2.5 | 22 | 20 | WS | 5 | 8 | 30 | HW | 192477 | |
| 110 | 3.6 | 2.5 | 32 | 20 | WS | 5 | 8 | 30 | HW | 192478 | |
| 120 | 3.2 | 2.2 | 32 | 20 | WS | 5 | 10 | 10 | HW | 192483 | |
| 140 | 3.2 | 2.2 | 22 | 36 | WS | 5 | 10 | 15 | HW | 192488 | |
| 140 | 3.2 | 2.2 | 16 | 36 | WS | 5 | 10 | 15 | HW | 192489 | |
| 150 | 3.2 | 2.2 | 22 | 48 | WS | 5 | 10 | 10 | HW | 192493 | |
| 160 | 3.2 | 2.2 | 30 | 24 | WS | 2/7/42 | 5 | 15 | 10 | HW | 192495 |
| 160 | 3.2 | 2.2 | 40 | 30 | WS | 4/5,5/52 | 10 | -8 | 20 | HW | 192496 |
| 160 | 3.2 | 2.2 | 20 | 48 | WS | 2/5/32 | 5 | 10 | 10 | HW | 192497 |
| 160 | 3.2 | 2.2 | 22 | 48 | WS | 5 | -8 | 10 | HW | 192498 | |
| 200 | 3.2 | 2.2 | 30 | 64 | WS | 4/6,6/60 + 2/6,2/42 | 0 | 10 | 15 | HW | 192501 |
| 125 | 2.4 | 1.6 | 32 | 24 | WS | 0 | 15 | 30 | HW | 192900 | |
| 170 | 3.2 | 2.2 | 30 | 36 | WS | 4/5.5/52 | 0 | 10 | 20 | HW | 193354 |
| 100 | 2.4 | 1.6 | 22 | 20 | WS | 2/4/30 | 5 | -8 | 10 | HW | 58808802 |
Product Details
Maschine
edge banders
edge trimming machines
edge trimming machines
Application
for trimming of plastic-, veneer- and solid wood edges
Design
special NoNoise gullet geometry
positive or negative hook angle
with or without shear angle
tooth configuration: alternate top bevel "WS"
cutting material: HW TC06
Advantages
especially low noise level
noise reduction by approx. 6 dB(A) when idling
noise reduction by approx. 6 dB(A) when idling
Diameter - Outermost cutting point
100
Cutting width 1
3.2
Clamping length
2.2
Bore / shank diameter
22
Number of teeth
20
Tooth configuration
Alternate top bevel
RPM max
018000
Cutting direction
universal
Cutting material group
Hardmetal