text.skipToContent text.skipToNavigation
KKO ID 192456
192476-ECOM

Product variants

Product variants
DA SB1 IML IMD Z ZK NL AShear W_Span CornerAngle Cut_Mat Mat.-No.
160 3.5 2.5 22 36 WS   5 -5 15 HW 188662
160 3 2.5 22 36 WS   0 -5 15 HW 192456
90 3 2 30 20 WS   0 8 10 HW 192471
100 2.4 1.6 22 12 WS   5 15 10 HW 192472
100 3.2 2.2 22 20 WS   0 8 15 HW 192475
100 2.6 1.6 32 30 WS   5 10 15 HW 192476
110 3.6 2.5 22 20 WS   5 8 30 HW 192477
110 3.6 2.5 32 20 WS   5 8 30 HW 192478
120 3.2 2.2 32 20 WS   5 10 10 HW 192483
140 3.2 2.2 22 36 WS   5 10 15 HW 192488
140 3.2 2.2 16 36 WS   5 10 15 HW 192489
150 3.2 2.2 22 48 WS   5 10 10 HW 192493
160 3.2 2.2 30 24 WS 2/7/42 5 15 10 HW 192495
160 3.2 2.2 40 30 WS 4/5,5/52 10 -8 20 HW 192496
160 3.2 2.2 20 48 WS 2/5/32 5 10 10 HW 192497
160 3.2 2.2 22 48 WS   5 -8 10 HW 192498
200 3.2 2.2 30 64 WS 4/6,6/60 + 2/6,2/42 0 10 15 HW 192501
125 2.4 1.6 32 24 WS   0 15 30 HW 192900
170 3.2 2.2 30 36 WS 4/5.5/52 0 10 20 HW 193354
100 2.4 1.6 22 20 WS 2/4/30 5 -8 10 HW 58808802

Product Details

Maschine
edge banders
edge trimming machines
Application
for trimming of plastic-, veneer- and solid wood edges
Design

special NoNoise gullet geometry
positive or negative hook angle
with or without shear angle
tooth configuration: alternate top bevel "WS"
cutting material: HW TC06

Advantages
especially low noise level
noise reduction by approx. 6 dB(A) when idling
Diameter - Outermost cutting point
160
Cutting width 1
3
Clamping length
2.5
Bore / shank diameter
22
Number of teeth
36
Tooth configuration
Alternate top bevel
RPM min
000000
RPM max
014400
Cutting direction
universal
Cutting material group
Hardmetal
Scope of application
through-feed processing
Application
Edge trimming refinishing
Processing step
Trimming
Workpiece material
Plastics
Solidwoodandsolidwoodproducts
Workpiece type
Hard wood
Thermoplastics
Soft wood
Workpiece material
Cross cut try hardwood
PVC (foil)
ABS (block material)
PE (block material)
PP (polypropylene)
PVC (block material)
Cross cut dry

Downloads