Turnover Knives HW with 4 cutting edges and countersink - with rounded edges | Turnover Knives HW - bore with countersink | Knives / Turnover Knives | Exchangeable knives / Knives

Turnover Knives HW with 4 cutting edges and countersink - with rounded edges ID 187323

SB1	IMD	H	T	Cut_Mat	WedgeAngle	CMS1	Mat.-No.
14	8.6	14	1.2	HW	60	S30	163701
13.6	6.3	13.6	2	HW	45	S30	163829
14.3	6.3	14.3	2.5	HW	55	S20	170248
15	6.4	15	2.5	HW	60	S20	180454
15	6.4	15	2.5	HW	60	S20	185274
15	6.4	15	2.5	HW	60	S20	185950
15	6.2	15	2.5	HW	60	S25	187323

SB1	IMD	H	T	Cut_Mat	WedgeAngle	CMS1	Mat.-No.
14	8.6	14	1.2	HW	60	S30	163701
13.6	6.3	13.6	2	HW	45	S30	163829
14.3	6.3	14.3	2.5	HW	55	S20	170248
15	6.4	15	2.5	HW	60	S20	180454
15	6.4	15	2.5	HW	60	S20	185274
15	6.4	15	2.5	HW	60	S20	185950
15	6.2	15	2.5	HW	60	S25	187323

Application

for use in cutterheads

Design

cutting material: HW
TCw25 for hard woods and soft woods
TCw40 for hard and soft woods

Notes

packing unit: 10 pieces

Cutting width 1

Bore / shank diameter

6.2

Height

Thickness

2.5

Number of teeth

Cutting material group

Hardmetal

Dimension

15x15x2,5 R150 R0,5 Solid 20

Machine group

Machine neutral

Machine type

Neutral

Machine / Aggregate

Neutral

Workpiece material

Solidwoodandsolidwoodproducts

Workpiece type

Soft wood
Hard wood
Glued laminated timber

Workpiece material

Longitudinal cut wet softwood
Cross cut wet
Cross cut dry
BSH
Veneered timber
Longitudinal cut dry
KVH
Glued laminated timber board