text.skipToContent
text.skipToNavigation
![LEUCO-g7-System]()
NF- Positive - Profiles 'G7'
ID
192663
Product variants
Product variants
| DA | SB1 | IML | IMD | Z | ZK | NL | W_Span | Cut_Mat | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 400 | 3.8 | 3.2 | 30 | 98 | G7 | 2/7/42 + 2/9/46 + 2/10/60 + 2/15/80 + 4/12/64 | 5 | HW | 192659 |
| 420 | 3.8 | 3.2 | 30 | 98 | G7 | 5 | HW | 192660 | |
| 500 | 4 | 3.4 | 30 | 126 | G7 | 2/7/42 + 2/9/46 + 2/10/60 + 2/10/70 + 4/12/64 | 5 | HW | 192661 |
| 350 | 3.2 | 2.5 | 30 | G7 | 2/7/42 + 2/9/46 + 2/10/60 | 5 | HW | 192662 | |
| 300 | 3.2 | 2.5 | 30 | 98 | G7 | 2/7/42 + 2/9/46 + 2/10/60 + 2/11/70 | 5 | HW | 192663 |
| DA | SB1 | IML | IMD | Z | ZK | NL | W_Span | Cut_Mat | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 400 | 3.8 | 3.2 | 30 | 98 | G7 | 2/7/42 + 2/9/46 + 2/10/60 + 2/15/80 + 4/12/64 | 5 | HW | 192659 |
| 420 | 3.8 | 3.2 | 30 | 98 | G7 | 5 | HW | 192660 | |
| 500 | 4 | 3.4 | 30 | 126 | G7 | 2/7/42 + 2/9/46 + 2/10/60 + 2/10/70 + 4/12/64 | 5 | HW | 192661 |
| 350 | 3.2 | 2.5 | 30 | G7 | 2/7/42 + 2/9/46 + 2/10/60 | 5 | HW | 192662 | |
| 300 | 3.2 | 2.5 | 30 | 98 | G7 | 2/7/42 + 2/9/46 + 2/10/60 + 2/11/70 | 5 | HW | 192663 |
Product Details
Maschine
table saws
Application
for burr-free and smooth cuts in thin-walled aluminum window and façade profiles and PVC profiles
Design
positive hook angle
tooth configuration: "G7"
cutting material: HW TC06
tooth configuration: "G7"
cutting material: HW TC06
Advantages
reduced cutting pressure thanks to group tooth geometry
excellent cuts with low roughness thanks to tooth partition
extremely noise-reduced thanks to special laser ornaments
increased edge life compared to saw blades with tooth configuration "TR-F"
increased performance and economic efficiency
excellent cuts with low roughness thanks to tooth partition
extremely noise-reduced thanks to special laser ornaments
increased edge life compared to saw blades with tooth configuration "TR-F"
increased performance and economic efficiency
Notes
secure workpiece clamping required
max. wall thickness 5 mm
Diameter - Outermost cutting point
300
Cutting width 1
3.2
Clamping length
2.5
Bore / shank diameter
30
Number of teeth
98
Tooth configuration
G7
Pin holes
2/7/42 + 2/9/46 + 2/10/60 + 2/11/70
RPM max
006400
Cutting direction
universal
Cutting material group
Hardmetal
Cutting quality
++++
Machine group
sawing machines
Machine type
Clipping and miter saws
Table and sizing saw-main saw
Table and sizing saw-main saw
Workpiece material
Plastics
Metals
Metals
Workpiece type
Thermoplastics
Aluminum
Aluminum
Workpiece material
PVC (profile)
Aluminum (hollow profile)
Aluminum (hollow profile)