| IML | IMD | ITD | ITDinch | ITLmin | Mat.-No. |
|---|---|---|---|---|---|
| 54.5 | 25 | 6 | 27 | 182304 | |
| 54.5 | 25 | 8 | 27 | 182305 | |
| 54.5 | 25 | 10 | 32 | 182306 | |
| 54.5 | 25 | 12 | 37 | 182307 | |
| 54.5 | 25 | 14 | 37 | 182308 | |
| 54.5 | 25 | 16 | 38 | 182309 | |
| 54.5 | 25 | 18 | 38 | 182310 | |
| 54.5 | 25 | 20 | 42 | 182311 | |
| 54.5 | 25 | 1/2 | 37 | 182653 | |
| 54.5 | 25 | 3/4 | 42 | 182655 | |
| 45 | 12 | 3 | 27 | 183022 | |
| 45 | 12 | 4 | 27 | 183023 | |
| 45 | 12 | 5 | 27 | 183024 | |
| 45 | 12 | 6 | 27 | 183025 | |
| 45 | 12 | 8 | 27 | 183026 | |
| 50.5 | 20 | 3 | 27 | 183027 | |
| 50.5 | 20 | 4 | 27 | 183028 | |
| 50.5 | 20 | 5 | 27 | 183029 | |
| 50.5 | 20 | 6 | 27 | 183030 | |
| 50.5 | 20 | 8 | 27 | 183032 | |
| 50.5 | 20 | 10 | 32 | 183034 | |
| 50.5 | 20 | 12 | 37 | 183036 | |
| 50.5 | 20 | 14 | 37 | 183038 | |
| 50.5 | 20 | 16 | 38 | 183040 | |
| 47.5 | 16 | 8 | 27 | 186099 | |
| 47.5 | 16 | 10 | 32 | 186100 | |
| 47.5 | 16 | 12 | 37 | 186101 | |
| 50.5 | 20 | 1/8 | 27 | 186914 |
for holding shank tools in TRIBOS, ps-System and all standard hydro expansion chuck
concentric accuracy ≤ 0.003 mm
shank diameter tolerance h7 or g7
coolant-tight up to 80 bar
permanent concentricity and tool-change repeat accuracy ≤ 0.003 mm
Lmin minimum clamping length = minimum shaft length
