text.skipToContent
text.skipToNavigation
![Mega-Steel]()
Mega-Steel
ID
58805871
Product variants
Product variants
| DA | SB1 | IML | IMD | Z | ZK | NL | W_Span | Cut_Mat | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 305 | 2.2 | 1.8 | 25.4 | 60 | F-WFA | 0 | HT | 50805872 | |
| 305 | 2.2 | 1.8 | 25.4 | 80 | F-WFA | 0 | HT | 50805873 | |
| 305 | 2.2 | 1.8 | 30 | 80 | F-WFA | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 0 | HT | 50805874 |
| 355 | 2.2 | 1.8 | 25.4 | 80 | F-WFA | 10 | HT | 50805876 | |
| 355 | 2.2 | 1.8 | 30 | 90 | F-WFA | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 0 | HT | 50805877 |
| 355 | 2.2 | 1.8 | 25.4 | 90 | F-WFA | 10 | HT | 50805878 | |
| 254 | 2.2 | 1.8 | 25.4 | 72 | F-WFA | 0 | HT | 58805870 | |
| 254 | 2.2 | 1.8 | 30 | 72 | F-WFA | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 0 | HT | 58805871 |
| DA | SB1 | IML | IMD | Z | ZK | NL | W_Span | Cut_Mat | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 305 | 2.2 | 1.8 | 25.4 | 60 | F-WFA | 0 | HT | 50805872 | |
| 305 | 2.2 | 1.8 | 25.4 | 80 | F-WFA | 0 | HT | 50805873 | |
| 305 | 2.2 | 1.8 | 30 | 80 | F-WFA | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 0 | HT | 50805874 |
| 355 | 2.2 | 1.8 | 25.4 | 80 | F-WFA | 10 | HT | 50805876 | |
| 355 | 2.2 | 1.8 | 30 | 90 | F-WFA | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 0 | HT | 50805877 |
| 355 | 2.2 | 1.8 | 25.4 | 90 | F-WFA | 10 | HT | 50805878 | |
| 254 | 2.2 | 1.8 | 25.4 | 72 | F-WFA | 0 | HT | 58805870 | |
| 254 | 2.2 | 1.8 | 30 | 72 | F-WFA | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 0 | HT | 58805871 |
Product Details
Maschine
dry-cuter machines
universal metal-cut machines
universal metal-cut machines
Application
for dividing and miter cuts in composite materials, metal sheets, stainless steel, plastics, NF-metals, cable ducts, profiles, SML-tubes, etc.
Design
tooth configuration: flat with alternating chamfer "F-WFA"
cutting material: HT TCx03
cutting material: HT TCx03
Advantages
dry cut
excellent cutting qualtiy
extremely long edge lives
excellent cutting qualtiy
extremely long edge lives
Notes
for smaller dimensions we recommend our HKS Parat - Negativ, HKS Unisteel and HKS Mega Steel
rec. rpm:
Ø250 = 1750 rpm
Ø305 = 1500 rpm
Ø355 = 1250 rpm
Diameter - Outermost cutting point
254
Cutting width 1
2.2
Clamping length
1.8
Bore / shank diameter
30
Number of teeth
72
Tooth configuration
Flachzahn mit wechselseitiger Fase
Pin holes
2/7/42 + 2/9,5/46,5 + 2/10/60
RPM max
007600
Cutting direction
universal
Cutting material group
Cermet
Cutting quality
++
Cutting material specification [CMSS1]
Cermet03
Machine group
sawing machines
Workpiece material
Metals
Mineral workpiece materials
Mineral workpiece materials
Workpiece type
Aluminum
Copper
Zinc
Composite material
Copper
Zinc
Composite material
Workpiece material
Iron covered particle board
Magnet bond board
Aluminum (sheet)
Aluminum (hollow profile)
AlusandwichboardwithPufilling
Aluminum (foam)
Aluminum (block material)
Aluminum (honeycomb panel)
Copper (sheet)
Aluminum composite materials
Aluminium-HPL
Aluminum polyethylene
Steelplasticacousticelements
Zinc (sheet)
Aluminum plywood
Steel laminated timber
Magnet bond board
Aluminum (sheet)
Aluminum (hollow profile)
AlusandwichboardwithPufilling
Aluminum (foam)
Aluminum (block material)
Aluminum (honeycomb panel)
Copper (sheet)
Aluminum composite materials
Aluminium-HPL
Aluminum polyethylene
Steelplasticacousticelements
Zinc (sheet)
Aluminum plywood
Steel laminated timber